Holographic HTV Starter Pack 12x10 inch sheets 8 pack bundle metal flake heat transfer vinyl
Holographic heat transfer material starter pack. Pack is for 8 sheets measuring approximately 12x10 inches each.
Holographic glossy heat transfer vinyl sheet. Gold and silver are iridescent. Can be layered and used in applique.
Rolls are not always exactly 20" from the manufacturer. Some may be +/- 1/4 to 1/2". We trim to the 12 inch length.
Adheres to Cotton, Polyester, Lycra, Spandex, Mesh, Burlap, Neoprene and uncoated Nylon
4.1 mils thick
Cut in reverse (mirror) with 45 or 60 degree blade.
Weed excess material.
Preheat garment for 2-3 seconds
Press at 320 degrees for 20 seconds with medium pressure.
Wait 24 hours before first wash. Wash inside out - warm with mild detergent. Do not dry clean or bleach. Air dry. Iron inside out.
**Due to variations in monitors, colors may vary slightly.
We do not refund for user error including but not limited to not following instructions, melting htv and using improper transfer tape. If this is the first time you are using our vinyl and/or you are using an iron to apply htv the customer needs to do a test cut and test pressing first with small or scrap pieces until the desired results are achieved. We do not recommend making a full design with the vinyl until you have familiarized yourself with it using your equipment. We include instructions in the package but if you have questions, we are always happy to help. Instructions are meant to be used as guidelines due to variations in heat presses, cutters and irons.