Stahls' CAD-CUT® Glaze Heat Transfer Vinyl sheet 10x20 or 12x20 inch iridescent shimmer htv

Breeze Crafts

$2.99 

Stahls' CAD-CUT® Glaze Heat Transfer Vinyl sheet 10x20 or 12x20 inch
Select color in drop-down menu

This is a discontinued product.  Available while supplies last.

Shimmering color, however you look at it.
Iridescent heat transfer material
Semi-gloss finish
Changes color depending on the angle from which it's viewed, the color of the garment and works with sublimated and athletic fabrics
Extremely thin, with a soft hand
Excellent stretch and rebound
Can be applied at a low temperature for temperature sensitive material
Not recommended for multi-layer applications

Material Specifications
Composition: Polyurethane (PU)
Carrier: Clear, Non-Pressure-Sensitive
Thickness: 83 microns (.83 mm)
Stretch & Rebound: 4
Washability: 25
Safety:CPSIA Certified

Natural Fiber/Blends Application Instructions
Time: 8-10 seconds
Temperature: 285-300°F/140-149°C
Pressure: Medium
Peel: Cold

Synthetic Fiber Application Instructions
Time: 8-10 seconds
Temperature: 265-285°F/129-140°C
Pressure: Medium
Peel: Cold

Material/Fabric Compatibility Natural Fibers:

100% Cotton
100% Preshrunk Cotton
Cotton/Poly Blends

Synthetic Fibers:

100% Polyester
Uncoated Nylons

See images for full application information

**Due to variations in monitors, uploading and rgb conversion colors may vary from the images. They are only provided as reference and are not guaranteed to be exact.

Rolls are not always exactly 20" from the manufacturer. Some may be approximately +/- 1/4 which could slightly affect the 10 or 20 inch length of the sheet.
Breeze Print Company is an authorized Stahls'® dealer.

Contact us for any custom orders.

https://www.facebook.com/breezeprintcompany
We do not refund for user error including but not limited to not following instructions, melting htv and using improper transfer tape. If this is the first time you are using our vinyl and/or you are using an iron to apply htv the customer needs to do a test cut and test pressing first with small or scrap pieces until the desired results are achieved. We do not recommend making a full design with the vinyl until you have familiarized yourself with it using your equipment. We include instructions in the package but if you have questions, we are always happy to help. Instructions are meant to be used as guidelines due to variations in heat presses, cutters and irons.